Skip to content

Organising a Large Stock Count With Zones

Blog CountRight 4 min read

The bigger the count, the easier it is to miss a shelf or count one twice. Zones solve this by giving every part of the store an owner and a status.

What a zone is

A zone is a clearly bounded area, such as a shelf unit, an aisle, a back-room rack or a display table, that one person counts completely.

An example zone plan

Zone Area Est. time Counter
A1 Front window display 15 min Sam
A2–A4 Left wall shelves 30 min each Sam
B1–B3 Centre tables 25 min each Priya
C1 Behind the counter 20 min Manager
Back-1 to Back-4 Stockroom racks 40 min each Leo, Jo

Writing estimated times next to each zone helps you balance the work and spot zones that are too large.

An example zone planA1 Front window15 min · SamA2–A4 Left wall30 min each · SamB1–B3 Centre tables25 min each · PriyaC1 Behind the counter20 min · ManagerBack-1 to Back-4Stockroom racks40 min each · Leo, JoEasy to forgetUnder tables, drawers,overflow boxes, the van
Write a time next to each zone to balance the work and spot zones that are too big.

Places people forget

  • Stock under display tables and in drawers.
  • Window displays and mannequins.
  • Items behind the counter, held for customers or awaiting repair.
  • Overflow boxes on top of racks.
  • Returns waiting to be processed.
  • Stock in a car, van or off-site storage.

Give each of these its own zone, or a clear rule, so it is not missed or counted twice.

Zones and store layout changes

When you rearrange the shop, update the zone map at the same time. Old maps that no longer match the floor are a common cause of skipped shelves.

Use zones to investigate

When a product shows a large variance, check which zones it was counted in. If the product normally sits in two places and one zone shows nothing, that zone may have been skipped or the stock moved during the count. Recounting just that zone is far quicker than recounting the product everywhere. Our guide to inventory variance covers the rest of the investigation.

Zones for daily cycle counts

Zones also make cycle counting simple: count one zone each morning and rotate through the store. Every product in the zone gets counted together, which is easier for staff than hunting for a list of products spread across the shop. For counting with a team, read counting stock with multiple devices.

Checking a zone is really done

“Done” should mean every item in the zone was scanned. A quick supervisor check catches most gaps: look along the shelves for anything without a counted marker, check under displays and in drawers, and compare the number of products counted in the zone with the last count. A zone with far fewer items than last time was probably not finished. Only close the count when every zone has passed this check. If you count with a team, read counting stock with multiple devices for how to combine scans safely.

How to set up zones

  1. Walk the store with a floor plan and mark every place stock is kept, including behind the counter, windows and overflow.
  2. Make zones small enough to count in 20 to 40 minutes.
  3. Name them simply: A1, A2, Back-1.
  4. Label them physically with signs or tape.
  5. Keep the same zones for every count, so results are comparable.

On count day

  • Assign zones to people, and keep a list of who has which.
  • Counters mark a zone as done only when it is complete.
  • A supervisor checks every zone is done before the count closes.

Zones make variances easier to explain

If a product shows a variance, you can see which zone it was counted in and recount just that area.

Zones and cycle counts

Zones also work for cycle counting: count one or two zones a day and the whole store gets covered on a rotation.

How CountRight helps

CountRight includes zones for organising large counts, merges scans from multiple devices, and flags conflicts when two people count the same item. Every count goes through variance review before stock is updated.

Read next: Best Stocktake Apps for Shopify Compared (2026) · ABC Analysis for Cycle Counts: Count What Matters Most

FAQ

How big should a zone be?

Small enough for one person to count completely in 20 to 40 minutes.

Should zone names stay the same between counts?

Yes. Keeping the same zones makes results comparable and helps you spot areas with repeated problems.

Can one zone include stock in two places?

It is better not to. Keep each zone to one physical area, and give a product stored in two places a count in each zone.

What do I do with stock found outside any zone?

Hand it to the supervisor, who counts it into a named “found” zone so it is included once.

Do zones help with small shops?

Yes. Even three or four zones make it obvious what has been counted and stop shelves being missed.